PTFE ROD (Ram extrusion、Molded)

Specification mm
Style Diameter Diameter tolerance Length Length tolerance Remark
Ram extrusion Φ4~20 ±0.01 1000~3000 ±5.0  
Molded Φ20~120 +1.0~3.0 100~300 ±5.0
Performance
Item Unit Standard
Density g/cm3 2.0~2.2
Tensile strength Mpa ≥14.0
Elongation % ≥140

FILLED PTFE ROD

Because of the addition of filling agent, some characteristics of
PTFE are greatly improved, especially on abrasion resistance, heat
conductivity, contravariance and self lubrication, which are
obviously better than pure FTFE Products.(Filler:class fibers\carbon.)

Specification mm
Style Diameter Diameter tolerance Length Length tolerance Remark
Ram extrusion Φ4~20 ±0.01 1000~3000 ±5.0  
Molded Φ20~120 +1.0~3.0 +1.0~3.0 ±5.0
Performance
Item Unit Standard
Density g/cm3 2.19~2.27
Tensile strength N/mm2 ≥11
Elongation % ≥140
Ball hardness N/mm2 ≥27

PTFE TUBING

(Extrusion、Molded)PTFE tubing is manufactured by ram extruding and
molding method with PTFE

Specification mm
Style Outside.Diameter Outside.Diameter tolerance Wall
thickness
Length
Extrusion Φ0.9~40 ±0.1 0.2~10  
Molded Φ40~800 +1.0~3.0 10~100 ≤250
Performance
Item Unit Standard
Density g/cm3 2.0~2.2
Tensile strength Mpa ≥15
Elongation % ≥100

FILLED PTFE TUBING

Because of the addition of filling agent, some characteristics of
PTFE are greatly improved, especially on abrasion resistance, heat
conductivity, contravariance and self lubrication, which are
obviously better than pure FTFE Products.(Filler:class fibers\carbon.)

Specification mm
Style Outside.
Diameter
Outside.Diameter tolerance Wall
thickness
Length Filler
Extrusion Φ0.9~40 ±0.1 0.2~10 according to request  
Molded Φ40~800 +1.0~3.0 10~100 ≤250

PTFE SHEET (Skived、Molded)

Specification mm
Style Thickness Thickness tolerance Length×Wigth Remark
skived Φ0.9~40 ±0.08~±0.6 100~2000  
Molded Φ40~800 ±0.7 ~±5.0 100~2000
Performance
Item Unit Standard
Density g/cm3 2.0~2.2
Tensile strength Mpa ≥15
Elongation % ≥100

PTFE FILM

Specification mm
Thickness Thickness tolerance Wigth Remark
0.035~0.1 0.01 30~120 according to request

PTFE SEAL TAPE

Use in pipe seals

Specification
Thickness mm Width mm Length m Remark
0.1 13/26/52 10~40 according to request

PTFE O RING

Specification
Cross section diameter Outside diameter Remark
1.0~6.0 20~320 Other Spec. according to request

PTFE GASKET

according to request

ELASTICTY PTFE TAPE

Specification/ Performance
Size mm Tensile strength Elongation
5~50×3~6 ≥7 140

PTFE ARTICLES

PTFE special articles, which made from high qualify PTFE resin, are
finish machined by methods of moulding, skiving and lathe.( according
to request)

PTFE FABRIC

Specification/ Performance
Thickness Width Temperature Tensile strength
0.5~1.5 4 -70~260 ≥320

PTFE SEAL UNSINTERED ROD

Specification/ Performance
Diameter Length Temperature Filler
3~30 according to request -70~260℃ according to request

PTFE COATING

Fluorocarbon coating featuring extremely good,antiweathering,
anti-corrosiveness

PTFE PACKING

Performance
Tensile strength Elongation Filler
≥7 ≥140% according to request